Australia Vape
1ml | Full Ceramic 510 Vape Cartridge | for THICK OIL | 5 PACK
Sale price
Price
$39.99
Regular price
Resistance: 1.4Ω
Inlet hole: 2.0mm x4
Features:
- Ceramic mouthpiece (screw fit)
- refillable
- Ceramic center post core
- no metal contamination: heavy metal test certified
-
Ceramic coil
- lack of contaminants (like burnt cotton wicks) provides a flavour that more accurately represents the extract.
- Works better with more viscous (thicker ) oils
- Bottom airflow
- Auto-draw (buttonless inhale) vape pen compatible
- No-glue construction
- no glue taste/burning
- 510 threading
MANUFACTURER'S FILLING INSTRUCTIONS
CAUTION:
- Exposing cartridges to high temperatures during filling may cause the oil in the cartridge to expand, resulting to leakage.
- Cartridges must always remain upright during the filling process.
- Recommended filling temperature: 32°- 55° Celsius
FILLING:
- Using a blunt tipped needle, no larger than 14 gauge, insert the tip between the outer wall of the cartridge and the center post. Do not fill the center post.
- If cartridge is overfilled, wipe the exterior carefully with a dilution of 50% alcohol to water immediately.
- When removing the needle, do not allow fluid to drip on the inner surface where the mouthpiece is to be seated. This will reduce the tightness of the mouthpiece.
CAPPING:
- Immediately after filling, seat the mouthpiece firmly to prevent leakage.
- Avoid oil residue between the mouthpiece and tip & the cartridge. This may cause the tip to become unseated.
PRIMING
- Once the cartridge has been filled and capped, seat the cartridge upside down, with the mouthpiece at the bottom.
- Allow the oil to settle and cool for 30 minutes prior to flipping upright.
USAGE
- Allow the filled cartridges to stand upright for a minimum of 30 minutes before use. This will allow the atomizer to fully saturate for optimum vaporization.